STAINLESS STEEL
C Class Propellers: 40 – 60 HP, 3.5” Gearcase
|
ILC
11.25" DIAMETER, AVAILABLE IN 10" - 15" PITCH, 3-BLADE, RIGHT-HAND ROTATION, NO CUP, GOOD FOR SUBMERGED APPLICATIONS, WILL NOT WORK PROPERLY IN VENTILATING CONDITIONS, XTREME VALUE SERIES - POLISHED FINISH ONLY |
|
NREB
DIAMETER VARIES WITH PITCH FROM 10.375"-10.5", AVAILABLE IN 12"-15" PITCH, 3 BLADE, RIGHT-HAND ROTATION, A LARGER DIAMETER VERSION OF THE REB TO HANDLE HIGHER HORSEPOWER, OR HEAVIER LOADS - POLISHED FINISH ONLY |
|
REB
10.25" DIAMETER, AVAILABLE IN 10"-17" PITCH, 3-BLADES, RIGHT-HAND ROTATION, FACTORY EQUIVALENT TO MERCURY BLACK MAX, 15 DEGREES AFT RAKE, CUPPED, EXCELLENT ALL-PURPOSE PROP FOR SUZUKI 20-35 HP FAMILY – ALSO AVAILABLE IN A 4 BLADE - POLISHED FINISH ONLY |
|
SCA
11.00" DIAMETER, AVAILABLE IN 13"-14" PITCH, 3 BLADES, RIGHT-HAND ROTATION, A LARGER DIAMETER VERSION OF THE SCB TO HANDLE HIGHER HORSEPOWER, OR HEAVIER LOADS |
|
SCB - 3 BLADE
10.375" DIAMETER, AVAILABLE IN 10"-18" PITCH, 3 BLADES, RIGHT-HAND ROTATION, SPEED PROPELLER, EXCELLENT STERNLIFT, GOOD ON INFLATABLES AND FLAT-BOTTOM HULLS - POLISHED FINISH ONLY |
|
SCB - 4 BLADE
10.375" DIAMETER, AVAILABLE IN 10"-17" PITCH, 4 BLADES, RIGHT-HAND ROTATION, EXCELLENT CORNERING, HOLESHOT, AND PORPOISE CONTROL, A PREFERRED CHOICE ON INFLATABLES AND FLAT-BOTTOM HULLS - POLISHED FINISH ONLY |
|
SRD - 3 BLADE
11.25" DIAMETER, AVAILABLE IN 11"-17" PITCH, 3 BLADES, RIGHT-HAND ROTATION, BEST ALL PURPOSE, PROP, 20 DEGREES RAKE - POLISHED FINISH ONLY |
|
SRD - 4 BLADE
11.25" DIAMETER, AVAILABLE IN 11"-17" PITCH, 4 BLADES, RIGHT-HAND ROTATION, AN ALL-AROUND 4-BLADE FOR 50-60HP MOTORS - POLISHED FINISH ONLY |
|
SRG
DIAMETER VARIES WITH PITCH FROM 11.75" TO 12.50", AVAILABLE IN 10"-17" PITCH, 3 BLADES, RIGHT-HAND ROTATION, 20 DEGREES RAKE, EXCELLENT ALL-AROUND PROPELLER, FACTORY EQUIVALENT TO OMC SST - POLISHED FINISH ONLY |
|
SWC - 3 BLADE
10.75" DIAMETER, AVAILABLE IN 10"-14" PITCH, 3 BLADES, RIGHT-HAND ROTATION, EXCEPTIONAL GRIP AND CAVITATION RESISTANCE, HARDWALL CUP, MOTOR ELEVATION AND TUNNEL CAPABILITIES, ALSO GOOD FOR PONTOONS AND SINGLE-ENGINE CATAMARANS |
|
SWC - 4 BLADE
10.75" DIAMETER, AVAILABLE IN 10"-14", 4 BLADES, RIGHT-HAND ROTATION, MORE GRIP AND CAVITATION RESISTANCE THAN SWC3, EXCELLENT FOR TUNNELS, MOTOR ELEVATION, AND CAVITATION-PRONE APPLICATIONS - POLISHED FINISH ONLY |
|
WBA
12.00" DIAMETER, AVAILABLE IN 7"-13" PITCH, 3 BLADE, RIGHT-HAND ROTATION, THRUSTER SERIES, LOAD PUSHING, WIDE BLADE, GREAT FOR PONTOON AND WORKBOATS - POLISHED FINISH ONLY |
